Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 818

5 XTUN-1009 XTUN-1009 Message Message Type Severity Probable Cause Recommended Action FCIP OSTP Write blocks purged due to PLOGI slot= DP= SFID= DFID= SID/DID/Lun=0x//. LOG ERROR Indicates that more than one outstanding write command that were purged due to the receipt of a new PLOGI sequence. This can indicate missing blocks on the currently mounted tape. If the tape job resumed after this error, you must confirm the integrity of the data on the tape. Contact your vendor's customer support for assistance. XTUN-1010 Message Message Type Severity Probable Cause Recommended Action FCIP FC RCV frame drop due to on slot= DP= FPGA= VC= Frames Dropped=. LOG ERROR Indicates that a Fibre Channel (FC) received frame event was posted, but the frame was dropped due to a receive error. This error is likely faulty hardware. Contact your vendor's customer support for assistance. XTUN-1011 Message Message Type Severity Probable Cause Recommended Action FCIP FC RCV low XBAR flow control is slot= DP= FPGA= VC= Count=. LOG WARNING Indicates flow control event due to lack of Fibre Channel (FC) receive buffer resources. If this event occurs repeatedly, contact your vendor's customer support for assistance. 800 Brocade Fabric OS Message Reference 53-1004119-01