Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 565

NBFS-1003 5 NBFS-1003 Message Message Type Severity Probable Cause Recommended Action DB_XMIT_SET flag not set in state , input , port . LOG WARNING Indicates the database transmit set flag was not set for the specified input state on the specified port. Neighbor finite state machine (NBFSM) states are as follows: • 0 - Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full No action is required. The Fabric OS automatically recovers from this problem. NBFS-1004 Message Message Type Severity Probable Cause Recommended Action Wrong input: to neighbor FSM, state , port . LOG INFO Indicates the wrong input was sent to the neighbor finite state machine (NBFSM). NBFSM states are as follows: • 0 - Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full If this error occurs repeatedly, then there is a problem in the protocol implementation between two switches. Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is Full, then this message can safely be ignored. Otherwise, run the portDisable and portEnable commands to refresh the port. Brocade Fabric OS Message Reference 547 53-1004119-01