Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 834

5 ZONE-1028 ZONE-1028 Message Message Type Severity Probable Cause Recommended Action Commit zone DB larger than supported - greater than . LOG WARNING Indicates that the zone database size is greater than the limit allowed by the fabric. The limit of the zone database size depends on the lowest level switch in the fabric. Older switches have less memory and force a smaller zone database for the entire fabric. Execute the cfgSize command to view the zone database size information. Edit the zone database to keep it within the allowable limit for the specific switches in your fabric. ZONE-1029 Message Message Type Severity Probable Cause Recommended Action Restoring zone cfg from flash failed - bad config saved to []. LOG WARNING Indicates that the zone configuration restored from the flash memory was faulty. This error will save the faulty zone configuration in the zoned core file directory. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. ZONE-1034 Message Message Type Severity Probable Cause Recommended Action A new zone database file is created. LOG INFO Indicates that a new zone database file has been created. No action is required. 816 Brocade Fabric OS Message Reference 53-1004119-01