Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 675

SEC-1192 5 SEC-1192 Message Message Type Severity Probable Cause Recommended Action Security violation: Login failure attempt via . LOG INFO Indicates a serial or modem login security violation was reported. The wrong password was used while trying to log in through a serial or modem connection; the login failed. Use the correct password. SEC-1193 Message Message Type Severity Probable Cause Recommended Action Security violation: Login failure attempt via . IP Addr: . LOG INFO Indicates a specified login security violation was reported. The wrong password was used while trying to log in through the specified connection method; the login failed. The error message lists the violating IP address. Verify that this IP address is being used by a valid switch admin. Use the correct password. SEC-1194 Message Message Type Severity Probable Cause Recommended Action This switch does not have all the required PKI objects correctly installed. LOG WARNING Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. Brocade Fabric OS Message Reference 657 53-1004119-01