Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 223

C4-1012 5 C4-1012 Message Message Type Severity Probable Cause Recommended Action S,P(): Link Timeout on internal port ftx= tov= (>) vc_no= crd(s)lost= complete_loss:. LOG WARNING Indicates that one or more credits have been lost on a back-end port, and there is no traffic on that port for two seconds. Turn on the back-end credit recovery to reset the link and recover the lost credits. If credit recovery has already been turned on, the link will be reset to recover the credits and no action is required. C4-1013 Message Message Type Severity Probable Cause Recommended Action Multi RDY/Frame Loss detected on Slot , Port () m_rdy(0x)/m_frame(0x). LOG WARNING Indicates that wait cycles to recover the lost frame or credit are exceeded on the specified port. Turn on the back-end credit recovery to reset the link and recover the lost credits. If credit recovery has already been turned on, the link will be reset to recover the credits and no action is required. C4-1014 Message Message Type Severity Probable Cause Recommended Action Link Reset on Port S,P() vc_no= crd(s)lost= trigger. LOG WARNING Indicates that one or more credits were lost and the link is reset. When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. Brocade Fabric OS Message Reference 205 53-1004119-01