Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 840

5 ZONE-1059 ZONE-1059 Message Message Type Severity Probable Cause Recommended Action Unexpected TI routing behavior or a potentially unroutable TI configuration has been detected on local domain . LOG WARNING Indicates that the current fabric topology and TI zone configuration may result in an unroutable condition or an unexpected routing behavior. Execute the zone --showTIerrors command on the specified switch to report the conflicting configuration details. ZONE-1060 Message Message Type Severity Probable Cause Recommended Action Non-TI and TI failover-enabled traffic restricted to domain due to TI failover-disabled zoning. LOG WARNING Indicates that only TI failover-disabled paths remain to reach the specified domain causing non-TI and TI failover traffic disruption. Add or restore the non-TI or TI failover-enabled inter-switch links (ISLs) to the specified domain. ZONE-1061 Message Message Type Severity Probable Cause Recommended Action Some trunk members are missing from failover disabled active TI zones. LOG WARNING Indicates that some members in the trunk group are not added to the failover-disabled TI zone. This will result in traffic disruption if the trunk member goes down. If any trunk member is included in the TI failover-disabled zone path, then always add all members from that group. Execute the zone --showTItrunkerrors command on the switch to find the missing trunk members in the TI zone. 822 Brocade Fabric OS Message Reference 53-1004119-01