Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 769

SULB-1026 5 SULB-1026 Message Message Type Class Severity Probable Cause Recommended Action Firmware commit operation started on the blade in slot . AUDIT | LOG FIRMWARE WARNING Indicates that the firmwareCommit command has started on the specified blade. The operation may be a normal part of firmware download, or it may have started to repair the secondary partition of the blade if the secondary partition is corrupted. Wait for the firmware commit operation to complete. SULB-1030 Message Message Type Class Severity Probable Cause Recommended Action The switch has rebooted during relocating the internal firmware image. AUDIT | LOG FIRMWARE WARNING Indicates that there may be an error caused by an unexpected disruption of the firmwareDownload command; for example, by powering the switch off and on in the middle of a firmware download. The error may also be caused by persistent storage hardware failure or by a software error. The firmwareDownload command will continue after the switch has rebooted. Run the firmwareDownloadStatus command to monitor progress. If the problem persists, contact your switch service provider. SULB-1031 Message Message Type Class Severity Probable Cause Recommended Action The switch is relocating an internal firmware image. AUDIT | LOG FIRMWARE WARNING Indicates that the switch has rebooted with the new firmware and is relocating the application processor (AP) firmware. Wait for the operation to complete. Brocade Fabric OS Message Reference 751 53-1004119-01