Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 225

C4-1018 5 C4-1018 Message Message Type Severity Probable Cause Recommended Action Link reset threshold value exceeded in the link S,P(). LOG ERROR Indicates that the specified blade is faulted because the link reset threshold value has exceeded. When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C4-1019 Message Message Type Severity Probable Cause Recommended Action S,C: HW ASIC Chip TXQ FID parity error threshold reached type = 0x. LOG WARNING Indicates that an internal error is observed in the application-specific integrated circuit (ASIC) hardware that may degrade the data traffic. Restart the system at the next maintenance window. C4-1020 Message Message Type Severity Probable Cause Recommended Action S,P(): Internal CRC with good EOF errors were observed, continuing monitoring. current:0x, last:0x thresh1:0x. LOG WARNING Indicates some CRC errors detected on backend link by hardware, typically applications are not affected at this low count. No action is required. Brocade Fabric OS Message Reference 207 53-1004119-01