Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 436

5 FICU-1013 FICU-1013 Message Message Type Severity Probable Cause Recommended Action Host data file cannot be reset to proper size. LOG WARNING Indicates that the file system is too full to create the host data file at the proper size. Execute the switchStatusShow command to check if the flash memory is full. If the flash memory is full, execute the supportSave command to clear the core files. FICU-1017 Message Message Type Severity Probable Cause Recommended Action FMSMODE enable failed because reserved area is bound to a device. LOG WARNING Indicates that one or both of the reserved areas 0xFE and 0xFF is bound to a device. Execute the wwnaddress --show command to display all devices currently bound to areas. Execute the wwnaddress --unbind command to release the reserved area from the device. FICU-1018 Message Message Type Severity Probable Cause Recommended Action FMSMODE enable noticed swapped ports. LOG WARNING Indicates that some ports are swapped at the time FICON Management Server mode (fmsMode) is enabled. Verify the expected FICON port address and port number relationship. For more information, refer to the "FICON and FICON CUP in Virtual Fabrics" section of the FICON Administrator's Guide. 418 Brocade Fabric OS Message Reference 53-1004119-01