Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 687

SEC-1321 5 SEC-1321 Message Message Type Severity Probable Cause Recommended Action Failed secure mode enable command. Reason: . LOG ERROR Indicates the security enable failed on the fabric because the switch has a conflicting configuration such as fabric-wide consistency configuration or AD configuration. Verify the security event was planned. If the security event was planned, run the fddCfg --fabwideset command or ad --clear command to clear the fabric wide consistency configuration or AD configuration and retry the secModeEnable command. SEC-1322 Message Message Type Severity Probable Cause Recommended Action Some DCC policy is too large, distribution cancelled. LOG WARNING Indicates this fabric is not able to support a Device Connection Control (DCC) policy with more than 256 ports. Reconfigure any policy that includes more than 256 ports in its member list, and then save the policy configuration changes. SEC-1323 Message Message Type Severity Probable Cause Recommended Action Key(s) \"\" ignored during configdownload. LOG INFO Indicates the specified key is ignored during configuration download. Verify the event was planned. If the event was planned, no action is required. If the event was not planned, take appropriate action as defined by your enterprise security policy. Brocade Fabric OS Message Reference 669 53-1004119-01