Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 655

SEC-1102 5 SEC-1102 Message Message Type Severity Probable Cause Recommended Action Fail to download . LOG ERROR Indicates the switch failed to download a certificate, security database, or policies. This can happen when the switch does not get enough resources to complete the operation, the fabric has not stabilized, or the policy database is an invalid format. Wait for the fabric to become stable and then retry the operation. If the policy database is in an illegal format (with configDownload command), correct the format and retry the operation. SEC-1104 Message Message Type Severity Probable Cause Recommended Action Fail to get primary . LOG ERROR Indicates the switch failed to get either the primary certificate or a primary public key. Verify the primary switch has a valid certificate installed and retry the operation. If a valid certificate is not installed, install a certificate by following the procedure specified in the Fabric OS Administrator's Guide. SEC-1105 Message Message Type Severity Probable Cause Recommended Action Fail to disable secure mode on all switches. LOG ERROR Indicates the switch failed to disable security in the fabric. This could happen if the switch cannot get the required resources to complete the command, and sending to a remote domain fails or the remote domain returns an error. Run the secFabricShow to verify that all switches in the fabric are in the ready state. Retry the command when all switches are ready. Brocade Fabric OS Message Reference 637 53-1004119-01