Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 300

5 EM-2003 EM-2003 Message Message Type Severity Probable Cause Recommended Action has failed the POST tests. FRU is being faulted. LOG ERROR Indicates that a field-replaceable unit (FRU) has failed the Power-On Self-Test (POST). Refer to the /tmp/post[1/2].slot#.log file for more information on the faults. To view this log file, you must be logged in at the root level. The ID will be Switch for non-bladed systems. On bladed systems, reseat the specified FRU. On non-bladed switches, restart or power cycle the switch. If the problem persists, perform the following actions: • Execute the diagPost command to make sure that Power-On Self-Test (POST) is enabled; then power cycle the blade by using the slotPowerOff and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. • On bladed systems, replace the specified FRU; otherwise, replace the switch. 282 Brocade Fabric OS Message Reference 53-1004119-01