Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 431

FICN-2085 5 FICN-2085 Message Message Type Severity Probable Cause Recommended Action FICON or FCP Emulation Enabled FCIP Tunnel is Up on VEPort=. LOG INFO Indicates a FICON or Fibre Channel Protocol (FCP) emulation-enabled FCIP tunnel has been established successfully to the peer switch. No action is required. FICN-2086 Message Message Type Severity Probable Cause Recommended Action FICON or FCP Emulation Enabled FCIP Tunnel is Down on VEport=. LOG ERROR Indicates a FICON or Fibre Channel Protocol (FCP) emulation-enabled FCIP tunnel to the peer switch has been terminated. This is an unexpected event; contact your vendor's customer support for assistance. FICN-2087 Message Message Type Severity Probable Cause Recommended Action FICON connected 3900 printer discovered Path=0x-invalid compression mode. LOG ERROR Indicates that FICON Printer emulation is enabled, but cannot be performed for this device because the compression mode on the tunnel is not set to None or Aggressive. If you desire FICON Printer emulation for this device, modify the tunnel compression mode to None (mode 0) or Aggressive (mode 3). Brocade Fabric OS Message Reference 413 53-1004119-01