Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 680

5 SEC-1300 SEC-1300 Message Message Type Severity Probable Cause Recommended Action This switch is in VcEncode mode. Security is not supported. LOG INFO Indicates the switch is set up with VC-encoded mode. Turn off VC-encoded mode before enabling security. SEC-1301 Message Message Type Severity Probable Cause Recommended Action This switch is in interop mode. Security is not supported. LOG INFO Indicates the switch is enabled in interop mode. Disable interop mode using the interopMode command before enabling the Secure Fabric OS feature. SEC-1302 Message Message Type Severity Probable Cause Recommended Action This switch does not have all the required PKI objects correctly installed. LOG INFO Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. 662 Brocade Fabric OS Message Reference 53-1004119-01