Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 240

5 CDR-1017 CDR-1017 Message Message Type Severity Probable Cause Recommended Action Blade in Slot faulted due to unavailable ports in internal Trunk. LOG ERROR Indicates that the specified blade is faulted due to unavailable ports in internal trunk. When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. CDR-1018 Message Message Type Severity Probable Cause Recommended Action Blade in Slot faulted due to Link reset threshold value exceeded. LOG ERROR Indicates that the specified blade is faulted because the link reset threshold is exceeded. When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. CDR-1019 Message Message Type Severity Probable Cause Recommended Action S,C: HW ASIC Chip TXQ FID parity error threshold reached type = 0x. LOG WARNING Indicates that an internal error is observed in the application-specific integrated circuit (ASIC) hardware that may degrade the data traffic. Restart the system at the next maintenance window. 222 Brocade Fabric OS Message Reference 53-1004119-01