Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 592

5 PLAT-1006 PLAT-1006 Message Message Type Severity Probable Cause Recommended Action Unknown midplane revision. LOG WARNING Indicates that the chassis has a midplane whose revision is unknown. This message occurs only on the Brocade M6505. Install newer firmware in the Chassis Management Controller (CMC). PLAT-1007 Message Message Type Severity Probable Cause Recommended Action BladeSystem Chassis type is unknown, setting maximum internal port speed to 8Gbps. LOG WARNING Indicates that the Onboard Administrator (OA) could be running an old version of firmware. If OA firmware is new enough to support Enclosure Information, then OA failed to send the Enclosure Information soon enough to allow the internal ports to run at 16 GFC. This message occurs only on the Brocade 6548. No action is required. PLAT-1008 Message Message Type Severity Probable Cause Recommended Action BladeSystem Enclosure Information arrived late from OA. LOG WARNING Indicates that the Onboard Administrator (OA) failed to send the Enclosure Information soon enough to allow the internal ports to run at 16 GFC. This message occurs only on the Brocade 6548. Execute the hareboot command, followed by the portdisable and portenable commands to allow internal ports to run at 16 GFC. 574 Brocade Fabric OS Message Reference 53-1004119-01