Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 449

FSS-1004 5 FSS-1004 Message Message Type Severity Probable Cause Recommended Action Memory shortage. LOG ERROR Indicates that the system ran out of memory. Execute the memShow command to view memory usage in the switch. For a dual CP system, enable the high availability (HA) state synchronization using the haSyncStart command. For non-bladed systems, restart the switch using the reboot command. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. FSS-1005 Message Message Type Severity Probable Cause Recommended Action FSS read failure. LOG WARNING Indicates that the read system call to the Fabric OS state synchronization (FSS) device has failed. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. FSS-1006 Message Message Type Severity Probable Cause Recommended Action No FSS message available. LOG WARNING Indicates that data is not available on the Fabric OS state synchronization (FSS) device. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Brocade Fabric OS Message Reference 431 53-1004119-01