Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 153

AUTH-1007 5 AUTH-1007 Message Message Type Severity Probable Cause Recommended Action The proposed authentication protocol(s) are not supported: port . LOG ERROR Indicates that the proposed authentication protocol types are not supported by the specified local port. Execute the authUtil command to make sure the local switch supports the Fibre Channel Authentication Protocol (FCAP) or Diffie Hellman - Channel Authentication Protocol (DH-CHAP) protocols. AUTH-1008 Message Message Type Severity Probable Cause Recommended Action No security license, operation failed. LOG ERROR Indicates that the switch does not have a security license. Verify that the security license is installed using the licenseShow command. If necessary, reinstall the license using the licenseAdd command. AUTH-1010 Message Message Type Severity Probable Cause Recommended Action Failed to initialize security policy: switch , error . LOG ERROR Indicates an internal problem with the Secure Fabric OS. Reboot or power cycle the switch. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Brocade Fabric OS Message Reference 135 53-1004119-01