Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 426

5 FICN-1115 FICN-1115 Message Message Type Severity Probable Cause Recommended Action HostPrintEgr:CmdReject Sense Data Rcvd:Path=0x LastCmds=0x SenseData:Bytes0-0xB=0x. LOG ERROR Indicates an active Print emulation sequence received Command Reject Sense data from the device. If there was an unexpected job failure or I/O error associated with this event, contact your vendor's customer support for assistance. FICN-1116 Message Message Type Severity Probable Cause Recommended Action HostPrintEgr:AS Link Level Reject (LRJ) from CU Rx Path=0x LastCmd=0x LastStatus=0x. LOG ERROR Indicates that a Link Level Reject (LRJ) was received from a device indicating that the Control Unit has lost the logical path to the Logical Partition (LPAR). If this was an unexpected event; contact your vendor's customer support for assistance. FICN-1117 Message Message Type Severity Probable Cause Recommended Action HostPrintIng:FICON Cancel received Path=0x state=0x. LOG WARNING Indicates a job was canceled during Print write pipelining. If this was an unexpected event (cancel is normally an operator event), contact your vendor's customer support for assistance. 408 Brocade Fabric OS Message Reference 53-1004119-01