Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 647

SEC-1078 5 SEC-1078 Message Message Type Severity Probable Cause Recommended Action No new data to abort. LOG ERROR Indicates there are no new changes in the defined security policy database that can be aborted. Verify the security event was planned. Verify if there were really any changes to the defined policy database that can be aborted. SEC-1079 Message Message Type Severity Probable Cause Recommended Action The policy name is invalid. LOG ERROR Indicates the policy name entered in the secPolicyCreate, secPolicyActivate, secPolicyAdd, or secPolicyDelete command was invalid. Run the command again using a valid policy name. SEC-1080 Message Message Type Severity Probable Cause Recommended Action Operation denied. Please use secPolicyActivate or distribute commands. LOG ERROR Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. Brocade Fabric OS Message Reference 629 53-1004119-01