Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 803

UCST-1003 5 UCST Messages UCST-1003 Message Message Type Severity Probable Cause Recommended Action Duplicate Path to Domain , Output Port = , PDB pointer = 0x. LOG INFO Indicates that duplicate paths were reported to the specified domain from the specified output port. The PDB pointer value displayed in the message is the address of the path database and provides debugging information. No action is required. UCST-1007 Message Message Type Severity Probable Cause Recommended Action Inconsistent route detected: Port = , should be . FFDC | LOG CRITICAL Indicates that the switch detected an inconsistency in the routing database between the routing protocol and the hardware configuration. The first port number displayed is what the hardware has configured and the second port number displayed is what the protocol is using. Run the switchDisable command and then the switchEnable command to reset the routing database. Run the uRouteShow command to display the new routing tables. UCST-1020 Message Message Type Severity Probable Cause Recommended Action Static route (input-area: , domain: output-area: ) has been ignored due to platform limitation. LOG WARNING Indicates that the configured static route cannot be applied to the routing database because of a platform limitation. No action is required. Brocade Fabric OS Message Reference 785 53-1004119-01