Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 299

EM-1220 5 EM-1220 Message Message Type Severity Probable Cause Recommended Action A problem (Error:) has been detected on one or both WWN cards. Please run the wwnrecover tool to get more information and recovery options. LOG ERROR Indicates that a problem was found either accessing one (or both) of the WWN cards or with the content of the data stored there. The content problem could be a corrupted data set or a mismatch between the two WWN cards. Execute the wwnrecover command to get details of the problems found and how to recover. EM-1221 Message Message Type Severity Probable Cause Recommended Action A WWN card insertion has been detected. WWN verification audit will be run to ensure no mismatches or other problems. LOG INFO Indicates that the second WWN card was enabled. Because the data may not match, the WWN verification audit will be run. If an EM-1220 follows, execute the wwnrecover command to get details of the problems found and how to recover. If not, no action is required. EM-1222 Message Message Type Severity Probable Cause Recommended Action A WWN card access problem has been encountered. Please run the wwnrecover tool to get more information and recovery options. LOG WARNING Indicates that a problem was encountered while accessing one (or both) of the WWN cards or with the content of the data stored there. Execute the wwnrecover command to get details of the problems found and how to recover. Brocade Fabric OS Message Reference 281 53-1004119-01