Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 201

C2-1001 5 C2 Messages C2-1001 Message Message Type Severity Probable Cause Recommended Action S,P(Bp) user_idx: [PID 0x] faulted due to SFP validation failure. Check if the SFP is valid for the configuration. LOG ERROR Indicates a deteriorated small form-factor pluggable (SFP) transceiver, an incompatible SFP transceiver pair, or a faulty cable between the peer ports. Verify that compatible SFP transceivers are used on the peer ports, the SFP transceivers have not deteriorated, and the Fibre Channel cable is not faulty. Replace the SFP transceivers or the cable if necessary. C2-1002 Message Message Type Severity Probable Cause Recommended Action Port chip faulted due to an internal error. LOG | FFDC ERROR Indicates an internal error. All the ports on the blade or switch will be disrupted. To recover a bladed system, execute the slotPowerOff and slotPowerOn commands on the blade. To recover a non-bladed system, execute the fastBoot command on the switch. C2-1004 Message Message Type Severity Probable Cause Recommended Action S,C: Invalid DMA ch pointer, chan:, good_addr:0x bad_addr:0x. LOG ERROR Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that may degrade the data traffic. Restart the system at the next maintenance window. If the problem persists, replace the blade. Brocade Fabric OS Message Reference 183 53-1004119-01