Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 757

SULB-1001 5 SULB Messages SULB-1001 Message Message Type Class Severity Probable Cause Recommended Action Firmwaredownload command has started. (From v To v). AUDIT | LOG FIRMWARE WARNING Indicates that the firmwareDownload command has been entered. This process should take approximately 17 minutes. The process is set to time out after 30 minutes. Do not fail over or power down the system during firmware upgrade. Allow the firmwareDownload command to continue without disruption. No action is required. Run the firmwareDownloadStatus command for more information. SULB-1002 Message Message Type Class Severity Probable Cause Recommended Action Firmwaredownload command has completed successfully. AUDIT | LOG FIRMWARE INFO Indicates that the firmwareDownload command has completed successfully and switch firmware has been updated. No action is required. The firmwareDownload command has completed as expected. Run the firmwareDownloadStatus command for more information. Run the firmwareShow command to verify the firmware versions. SULB-1003 Message Message Type Class Severity Probable Cause Firmwarecommit has started. AUDIT | LOG FIRMWARE INFO Indicates that the firmwareCommit command has been entered. Brocade Fabric OS Message Reference 739 53-1004119-01