Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 212

5 C3-1009 C3-1009 Message Message Type Severity Probable Cause Recommended Action S,P(): portcfglongdistance vc_translation_link_init = 1 overwrites fill word IDLE. ARB will be used on the link. LOG WARNING Indicates that the portcfglongdistance vc_translation_link_init 1 command has overwritten the fill word IDLE. Arbitrated loop (ARB) will be used on the link. No action is required. C3-1010 Message Message Type Severity Probable Cause Recommended Action S,C: Above normal hardware errors were observed: fault1:0x, fault2:0x thresh2:0x. LOG CRITICAL Indicates that above-normal errors were observed in hardware that may or may not impact the data traffic. When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C3-1011 Message Message Type Severity Probable Cause Recommended Action Detected a complete loss of credit on internal back-end VC: Slot , Port () vc_no= crd(s)lost=. LOG WARNING Indicates that all credits have been lost on the specified virtual channel (VC) and port. Turn on the back-end credit recovery to reset the link and recover the lost credits. If credit recovery has already been turned on, the link will be reset to recover the credits and no action is required. 194 Brocade Fabric OS Message Reference 53-1004119-01