Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 616

5 RCS-1004 RCS-1004 Message Message Type Severity Probable Cause Recommended Action Application() not registered.(). LOG ERROR Indicates that the specified application did not register with reliable commit service (RCS). Run the haShow command to view the HA state. Run the haDisable and haEnable commands. Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS v2.6, v3.1 and later, and v4.1 and later. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. RCS-1005 Message Message Type Severity Probable Cause Recommended Action Phase , Application returned , 0x. LOG INFO Indicates that a receiving switch is rejecting the specified reliable commit service (RCS) phase. If the reject is in the acquire change authorization (ACA) phase, wait for several minutes and then retry the operation from the sender switch. If the reject is in the stage fabric configuration (SFC) phase, check if the application license exists for the local domain and if the application data is compatible. RCS-1006 Message Message Type Severity Probable Cause State , Application AD, RCS CM. Domain returned 0x. App Response Code . LOG INFO Indicates that the specified domain rejected a reliable commit service (RCS) phase initiated by an application on the local switch. • If the reject phase is acquire change authorization (ACA), the remote domain may be busy and could not process the new request. • If the reject phase is stage fabric configuration (SFC), the data sent by the application may not be compatible or the domain does not have the license to support that application. 598 Brocade Fabric OS Message Reference 53-1004119-01