Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 590

5 PLAT-1000 PLAT Messages PLAT-1000 Message Message Type Severity Probable Cause Recommended Action . FFDC | LOG CRITICAL Indicates that nonrecoverable peripheral component interconnect (PCI) errors have been detected. The system will be faulted and may automatically reboot. If the system does not reboot automatically, reboot the system manually using the reboot command. Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. PLAT-1001 Message Message Type Severity Probable Cause Recommended Action CP resetting other CP (double reset may occur). LOG INFO Indicates the other control processor (CP) is being reset. This message is typically generated by a CP that is in the process of becoming the active CP. Note that in certain circumstances a CP may experience a double reset and reboot twice. A CP can recover automatically even if it has rebooted twice. No action is required. PLAT-1002 Message Message Type Severity Probable Cause Recommended Action CP: CP Fence 0x 0x CP Error 0x. LOG CRITICAL Indicates that the control processor (CP) cannot access the inter-integrated circuit (I2C) subsystem because of an error condition or because of being fenced or isolated from the I2C bus. Reboot the CP if it does not reboot automatically. Reseat the CP if rebooting does not solve the problem. If the problem persists, replace the CP. 572 Brocade Fabric OS Message Reference 53-1004119-01