Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 183

BL-1031 5 BL-1031 Message Message Type Severity Probable Cause Recommended Action Link timeout in internal port (slot , port ) resulted in blade fault. Use slotpoweroff/slotpoweron to recover the blade. LOG CRITICAL Indicates that link timeout occurred in one of the back-end internal ports. Power cycle the blade using the slotPowerOff and slotPowerOn commands. BL-1032 Message Message Type Severity Probable Cause Recommended Action (slot ,bitmap 0x) ports never came up ONLINE (reason , state ). Disabling slot. LOG CRITICAL Indicates that back-end (non-user) ports have not come online within the time limit. Execute the diagPost command to make sure that Power-On Self-Test (POST) is enabled; then power cycle the blade using the slotPowerOff and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. If the message persists, replace the blade. BL-1033 Message Message Type Severity Probable Cause Recommended Action (slot ,bitmap 0x) No disable acknowledgment from ports (state ). Disabling slot. LOG CRITICAL Indicates that the system has timed out waiting for the disable messages from the user ports after disabling the ports. Execute the diagPost command to make sure that Power-On Self-Test (POST) is enabled; then power cycle the blade using the slotPowerOff and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. If the message persists, replace the blade. Brocade Fabric OS Message Reference 165 53-1004119-01