Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 652

5 SEC-1093 SEC-1093 Message Message Type Severity Probable Cause Recommended Action New FCS list must have at least one member in common with current FCS list. LOG ERROR Indicates the new fabric configuration server (FCS) list does not have a common member with the existing FCS list. Resubmit the command with at least one member of the new FCS list in common with the current FCS list. SEC-1094 Message Message Type Severity Probable Cause Recommended Action Policy member not found. LOG ERROR Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds that there is an error in the security database. This is a rare occurrence. Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. SEC-1095 Message Message Type Severity Probable Cause Recommended Action Deleting FCS policy is not allowed. LOG ERROR Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. 634 Brocade Fabric OS Message Reference 53-1004119-01