Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 598

5 PORT-1003 PORT Messages PORT-1003 Message Message Type Severity Probable Cause Recommended Action Port Faulted because of many Link Failures. LOG WARNING Indicates the specified port is now disabled because the link on this port had multiple failures that exceeded an internally set threshold on the port. This problem is typically related to hardware. Check and replace (if necessary) the hardware attached to both ends of the specified port number, including: • The media (SFPs) • The cable (fiber optic or copper inter-switch link (ISL)) • The attached devices After checking the hardware, execute the portEnable command to re-enable the port. PORT-1004 Message Message Type Severity Probable Cause Recommended Action Port (0x) could not be enabled because it is disabled due to long distance. LOG INFO Indicates the specified port is not enabled because other ports in the same group have used the buffers for this port group. This happens when other ports were configured to be long distance. To enable this port, perform one of the following actions: • Reconfigure the other E_Ports so they are not long distance. • Change the other E_Ports so they are not E_Ports. This will free some buffers and allow this port to be enabled. 580 Brocade Fabric OS Message Reference 53-1004119-01