Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 500

5 IPS-1004 IPS-1004 Message Message Type Severity Probable Cause Recommended Action Port Config Mode Mismatch slot () port(ge): current mode is (). LOG WARNING Indicates that configured port mode is different from the intended use. Change the port configuration (by deleting configured FCIP tunnels or iSCSI sessions) to return the port mode to neutral before attempting to configure the port for a different mode or use. IPS-1005 Message Message Type Severity Probable Cause Recommended Action Tunnel Authorization Failure for slot () port(ge) tunnel ID() reason (). LOG WARNING Indicates that tunnel setup failed because of an authorization failure from the remote side. A reason for such a failure could be a WWN mismatch. Change the tunnel configuration on one side of the tunnel to authorize the remote side to set up the tunnel. IPS-1006 Message Message Type Severity Probable Cause Recommended Action Tunnel Configuration Mismatch for slot () port() tunnel ID() reason (). LOG WARNING Indicates that tunnel setup failed because of a configuration mismatch between the two ends. The reason field indicates the cause for configuration mismatch. Change the tunnel configuration on one side of the tunnel to match that of the other side to set up the tunnel. 482 Brocade Fabric OS Message Reference 53-1004119-01