Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 695

SEC-3001 5 SEC-3001 Message Message Type Class Severity Probable Cause Recommended Action Event: , Status: success, Info: Security mode on the fabric. AUDIT SECURITY INFO Indicates the security mode of the fabric was either enabled or disabled. Verify the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. SEC-3002 Message Message Type Class Severity Probable Cause Recommended Action Event: , Status: success, Info: . AUDIT SECURITY INFO Indicates the specified security event has occurred. The event can be one of the following: • There has been a fabric configuration server (FCS) failover. • A security policy has been activated. • A security policy has been saved. • A security policy has been aborted. • A non-FCS password has changed. Verify the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. SEC-3003 Message Message Type Class Severity Probable Cause Event: , Status: success, Info: Created policy, with member(s) . AUDIT SECURITY INFO Indicates a new security policy with entries has been created. When you use a wildcard (for example, an asterisk) in creating a policy, the audit report displays the wildcard in the event information field. Brocade Fabric OS Message Reference 677 53-1004119-01