Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 660

5 SEC-1119 SEC-1119 Message Message Type Severity Probable Cause Recommended Action Secure mode has been enabled. LOG INFO Indicates the secure Fabric OS was enabled by the secModeEnable command. Verify the security event was planned. If the security event was planned, there is no action required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. SEC-1121 Message Message Type Severity Probable Cause Recommended Action Time is out of range when . LOG ERROR Indicates the time on the switch is not synchronized with the primary fabric configuration server (FCS), the data packet is corrupted, or a replay attack is launched on the switch. Verify the security event was planned. If the security event was planned, verify that all switches in the fabric are in time synchronization with the primary FCS and that no external entity is trying to access the fabric. When verification is complete, retry the operation. SEC-1122 Message Message Type Severity Probable Cause Recommended Action Error code: , . LOG INFO Indicates that one of the switches in the fabric could not communicate with the primary fabric configuration server (FCS). Run the fabricShow command to verify that all switches in the fabric are in the ready state. When all switches are in the ready state, retry the operation. 642 Brocade Fabric OS Message Reference 53-1004119-01