Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 615

RCS-1001 5 RCS Messages RCS-1001 Message Message Type Severity Probable Cause Recommended Action RCS has been disabled. Some switches in the fabric do not support this feature. LOG INFO Indicates that the reliable commit service (RCS) feature has been disabled on the local switch because not all switches in the fabric support RCS or the switch is in non-native mode. Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS v2.6, v3.1 and later, and v4.1 and later. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. RCS-1002 Message Message Type Severity Probable Cause Recommended Action RCS has been enabled. LOG INFO Indicates that the reliable commit service (RCS) feature has been enabled. RCS must be capable on all switches in the fabric to be enabled. If all switches are capable, it is automatically enabled. No action is required. RCS-1003 Message Message Type Severity Probable Cause Recommended Action Failed to allocate memory: (). LOG ERROR Indicates that the specified reliable commit service (RCS) function has failed to allocate memory. This message is usually transitory. Wait for few minutes and retry the command. Check memory usage on the switch using the memShow command. Reboot or power cycle the switch. Brocade Fabric OS Message Reference 597 53-1004119-01