Dell Brocade G620 Brocade 8.0.1 Fabric OS Message Reference Guide - Page 285

EM-1017 5 EM-1017 Message Message Type Severity Probable Cause Recommended Action Uncommitted WWN change detected. Cold reboot required. LOG WARNING Indicates that a user did not commit a changed World Wide Name (WWN) value before performing a system restart, power cycle, or firmware download operation. Change and commit the new WWN value. EM-1018 Message Message Type Severity Probable Cause Recommended Action CP blade in slot failed to retrieve current chassis type (//0x). FFDC | LOG CRITICAL Indicates that there was a failure to read the chassis type from the system. Verify that the control processor (CP) blade is operational and is properly seated in its slot. EM-1019 Message Message Type Severity Probable Cause Recommended Action Current chassis configuration option () is not compatible with standby firmware version (Pre 4.4), cannot allow HA Sync. LOG WARNING Indicates that the current chassis configuration option is not supported by the firmware on the standby control processor (CP). This is true even if the standby CP comes up and is operational. High availability (HA) synchronization of the CPs will not be allowed. Change the chassis configuration option to 1 using the chassisConfig command, or upgrade the firmware on the standby CP to the version running on the active CP. Brocade Fabric OS Message Reference 267 53-1004119-01