Dell PowerEdge T605 Hardware Owner's Manual (PDF) - Page 115
Installing a RAID Battery, documentation for your card for more information.
View all Dell PowerEdge T605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Installing a RAID Battery 1 Insert the RAID battery into the battery carrier. See Figure 3-28. 2 Locate the battery bay towards the front of the chassis next to the hard drive bay (see Figure 3-28). 3 Insert the battery carrier and RAID battery into the system's battery carrier slots, ensuring that the battery carrier is aligned and fully seated in the slots. 4 Connect the battery cable to the SAS/RAID controller card. See the documentation for your card for more information. 5 Route the battery cable through the cable guides on the side of the processor shroud and through the battery cable slot in the chassis. See Figure 3-28 for the slot location. Installing System Components 115
Installing System Components
115
Installing a RAID Battery
1
Insert the RAID battery into the battery carrier. See Figure 3-28.
2
Locate the battery bay towards the front of the chassis next to the hard
drive bay (see Figure 3-28).
3
Insert the battery carrier and RAID battery into the system’s battery carrier
slots, ensuring that the battery carrier is aligned and fully seated in the
slots.
4
Connect the battery cable to the SAS/RAID controller card. See the
documentation for your card for more information.
5
Route the battery cable through the cable guides on the side of the
processor shroud and through the battery cable slot in the chassis. See
Figure 3-28 for the slot location.