Dell PowerEdge T605 Hardware Owner's Manual (PDF) - Page 142
Installing the Chassis Intrusion Switch, for the connector location.
View all Dell PowerEdge T605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Figure 3-37. Removing and Installing the Chassis Intrusion Switch 2 1 1 securing bracket notch 3 INTRUSION connector on system board 3 2 chassis intrusion switch Installing the Chassis Intrusion Switch 1 Align the chassis intrusion switch with the securing bracket notch. See Figure 3-37. 2 Slide the switch into the securing bracket notch. 3 Connect the switch cable to the INTRUSION connector on the system board. See Figure 6-1 for the connector location. 4 Install the expansion card shroud. See "Installing the Expansion Card Shroud" on page 75. 5 Close the system. See "Closing the System" on page 70. 6 Place the system upright and on its feet on a flat, stable surface. 142 Installing System Components
142
Installing System Components
Figure 3-37.
Removing and Installing the Chassis Intrusion Switch
Installing the Chassis Intrusion Switch
1
Align the chassis intrusion switch with the securing bracket notch. See
Figure 3-37.
2
Slide the switch into the securing bracket notch.
3
Connect the switch cable to the INTRUSION connector on the system
board. See
Figure 6-1
for the connector location.
4
Install the expansion card shroud. See "Installing the Expansion Card
Shroud" on page 75.
5
Close the system. See "Closing the System" on page 70.
6
Place the system upright and on its feet on a flat, stable surface.
1
securing bracket notch
2
chassis intrusion switch
3
INTRUSION connector on system
board
2
1
3