Dell PowerEdge T605 Hardware Owner's Manual (PDF) - Page 135
Gently lift the heat sink off of the processor and set the heat sink aside.
View all Dell PowerEdge T605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
7 Wait 30 seconds for the heat sink to loosen from the processor. 8 Gently lift the heat sink off of the processor and set the heat sink aside. NOTE: Lay the heat sink on its side to avoid contaminating the thermal adhesive on the bottom of the heat sink. NOTICE: The processor is held in its socket under strong pressure. Be aware that the release lever can spring up suddenly if not firmly grasped. 9 Position your thumb firmly over the socket-release lever and release the lever from the locked position. Rotate the lever 90 degrees upward until the processor is released from the socket. See Figure 3-35. 10 Rotate the processor shield upward and out of the way. Figure 3-35. Installing and Removing a Processor 2 3 1 7 1 notch in processor (2) 3 ZIF socket shield 5 ZIF socket 7 socket key (2) 4 6 5 2 processor 4 socket-release lever 6 processor shield Installing System Components 135