Dell PowerEdge T605 Hardware Owner's Manual (PDF) - Page 36

Table 1-6. System Messages (continued) Message Causes Corrective Actions More than one RAC detected, system halted More than one RAC card has Remove additional RAC been detected. card(s). You may only have a maximum of one RAC card installed (see "Installing a RAC Card" on page 106). No boot device available Faulty or missing optical drive subsystem, hard drive, or hard-drive subsystem, or no bootable USB key installed. Use a bootable USB key, CD, or hard drive. If the problem persists, see "Troubleshooting an Internal USB Key" on page 176 and "Troubleshooting a Hard Drive" on page 181. See "Entering the System Setup Program" on page 43 for information on setting the order of boot devices. No boot sector on hard drive Incorrect configuration settings in System Setup program, or no operating system on hard drive. Check the hard-drive configuration settings in the System Setup program (see "Entering the System Setup Program" on page 43). If necessary, install the operating system on your hard drive (see your operating system documentation). No timer tick interrupt Faulty system board. See "Getting Help" on page 205." PCI BIOS failed to install PCIe device BIOS (Option ROM) checksum failure detected during shadowing. Cables to expansion card(s) loose; faulty or improperly installed expansion card(s). Reseat the expansion card(s). Ensure that all appropriate cables are securely connected to the expansion card(s). If the problem persists, see "Troubleshooting Expansion Cards" on page 187. 36 About Your System