Dell PowerEdge T605 Hardware Owner's Manual (PDF) - Page 143
Power Supply Distribution Board
View all Dell PowerEdge T605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
7 Reattach any peripherals, then connect the system to the electrical outlet. 8 Turn on the system and attached peripherals. Power Supply Distribution Board If your system has redundant power supplies, it will have a power supply distribution board inside the system. Removing the Power Supply Distribution Board 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Remove the redundant power supplies. See "Removing a Redundant Power Supply" on page 76. 3 Open the system. See "Opening the System" on page 68. 4 Remove the expansion card shroud. See "Removing the Expansion Card Shroud" on page 72. 5 Remove the processor shroud. See "Removing the Processor Shroud" on page 72. 6 Remove the power supply distribution board shroud. Pull the release latch in the direction of the arrow. Holding the latch and the shroud touch point, lift the shroud up and out of the chassis. See Figure 3-38. Installing System Components 143