Dell PowerEdge T605 Hardware Owner's Manual (PDF) - Page 134
Unlatch the two heat-sink release levers by pressing down on the ends
View all Dell PowerEdge T605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
5 Remove the processor shroud. See "Removing the Processor Shroud" on page 72. NOTICE: When you remove the heat sink, the possibility exists that the processor might adhere to the heat sink and be removed from the socket. It is recommended that you remove the heat sink while the processor is still warm. NOTICE: Never remove the heat sink from a processor unless you intend to remove the processor. The heat sink is necessary to maintain proper thermal conditions. 6 Unlatch the two heat-sink release levers by pressing down on the ends of the levers and pulling them outward, releasing them from the release lever retainers. Swing the levers up to release the heat sink. See Figure 3-34. Figure 3-34. Installing and Removing the Heat Sink 4 1 3 1 heat sink 3 release levers (2) 2 2 release lever retainers (2) 4 thermal grease 134 Installing System Components