Dell PowerEdge T605 Hardware Owner's Manual (PDF) - Page 92
Removing the Diskette Drive, Removing the Front Drive Bezel
View all Dell PowerEdge T605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Removing the Diskette Drive CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the system and protecting against electrostatic discharge. 1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet and peripherals. 2 Open the system. See "Opening the System" on page 68. 3 Remove the front drive bezel. See "Removing the Front Drive Bezel" on page 66. 4 Disconnect the power and data cables from the diskette drive. 5 Slide the drive release latch in the direction of the arrow. See Figure 3-15. 6 Hold the latch in position and slowly pull the drive out of the bay. 92 Installing System Components