Dell PowerEdge T605 Hardware Owner's Manual (PDF) - Page 83
Close the system. See Closing the System on Reattach any peripherals
View all Dell PowerEdge T605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Figure 3-9. Removing and Installing a Hard Drive 2 3 1 4 1 hard drive 3 power cable 2 data cable 4 carrier release tab (2) NOTE: If you do not intend to replace the drive, it is recommended that you remove the drive from the guide bracket (see Figure 3-10) and insert the empty guide bracket back into the drive bay. This eliminates the likelihood that the empty bracket will be misplaced or improperly stored while not in use. 5 Close the system. See "Closing the System" on page 70. 6 Place the system upright and on its feet on a flat, stable surface. 7 Reattach any peripherals, then connect the system to the electrical outlet. 8 Turn on the system and attached peripherals. Installing System Components 83
Installing System Components
83
Figure 3-9.
Removing and Installing a Hard Drive
NOTE:
If you do not intend to replace the drive, it is recommended that you remove
the drive from the guide bracket (see Figure 3-10) and insert the empty guide
bracket back into the drive bay. This eliminates the likelihood that the empty bracket
will be misplaced or improperly stored while not in use.
5
Close the system. See "Closing the System" on page 70.
6
Place the system upright and on its feet on a flat, stable surface.
7
Reattach any peripherals, then connect the system to the electrical outlet.
8
Turn on the system and attached peripherals.
1
hard drive
2
data cable
3
power cable
4
carrier release tab (2)
3
4
2
1