Dell PowerEdge T605 Hardware Owner's Manual (PDF) - Page 85
See for the location of the hard drive
View all Dell PowerEdge T605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Figure 3-10. Installing a Hard Drive in a Drive Bracket 1 2 1 hard drive 2 hard-drive bracket NOTICE: SAS drives and SATA drives cannot be mixed in the system. The drives must be either SATA or SAS hard drives. NOTE: The SAS or SAS/RAID controller card must be installed in PCIe SLOT2. See Figure 6-1. 8 Connect the power cable to the hard drive. 9 Connect the data cable to the hard drive: • For connection to the integrated SATA controller (SATA hard drives only), connect the SATA data cable to the SATA_A (first drive) and SATA_B (second drive) connectors on the system board. See Figure 3-11. See Figure 6-1 for the location of the hard drive connectors on the system board. • For connection to a SAS or SAS/RAID controller expansion card (SAS or SATA hard drives), connect the data cables from the controller card and the power cables as shown in Figure 3-12. See "Installing a SAS Controller Card" on page 111 for instructions about installing the card. Installing System Components 85