Dell PowerEdge T605 Hardware Owner's Manual (PDF) - Page 35
Table 1-6., System Messages, Message, Causes, Corrective Actions, address, value
View all Dell PowerEdge T605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Table 1-6. System Messages (continued) Message Causes Corrective Actions Keyboard data line failure Keyboard stuck key failure Keyboard cable connector is loose or improperly connected, defective keyboard, or defective keyboard/mouse controller. Check the keyboard connection to the system. If the problem persists, try another keyboard, or see "Getting Help" on page 205. Keyboard fuse has Overcurrent has been failed detected at the keyboard connector. See "Getting Help" on page 205. Manufacturing mode detected System is in manufacturing Restart to take the system mode. out of manufacturing mode. Memory address line failure at address, read value expecting value Faulty or improperly installed See "Troubleshooting System memory modules. Memory" on page 174. Memory double word logic failure at address, read value expecting value Memory odd/even logic failure at address, read value expecting value Memory write/read failure at address, read value expecting value Memory tests terminated by keystroke POST memory test terminated by pressing the spacebar. Information only. About Your System 35