Yamaha DSP5D Owner's Manual - Page 11
Differences between the PM5D model and the PM5D-RH model, PM5D model
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Differences between the PM5D model and the PM5D-RH 1 model Introduction The PM5D is available as the standard PM5D model or as the PM5D-RH model which allows internal head amp settings to be programmed. These models differ as follows. ❏ PM5D model • Head amp adjustments (input sensitivity settings, phantom power (+48V) on/off) for the analog inputs (INPUT jacks 1-48, ST IN jacks 1-4) are performed manually, using the controls of the top panel. ❏ PM5D-RH model • Head amp adjustments (input sensitivity settings, phantom power (+48V) on/off) for the analog inputs are controlled from within the screen via software. For this reason, the top panel does not have head amp controls; instead, LEDs showing the presence or absence of a signal are provided. Head amp settings can be saved in a library and recalled at any time. • Insert jacks (INSERT IN/OUT jacks) for the monaural analog inputs (INPUT jacks 1-48) are provided on the rear panel, allowing external effect processors to be inserted in the analog domain. • ST IN jacks 1-4 are only for line level. • There is no +48V MASTER switch. ST IN jacks 1-4 INPUT jacks 1-48 • Insert jacks for the analog inputs are not provided. • ST IN jacks 1-4 support mic levels through line levels. Phantom power can also be supplied to ST IN jacks 1- 4. • The +48V MASTER switch turns all phantom power (+48V) on/off. INSERT IN/OUT jacks 1-48 ST IN jacks 1-4 INPUT jacks 1-48 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section 11