Yamaha DSP5D Owner's Manual - Page 114

14 Effects Basic operations in the effect screen This section explains how to store or recall effect library data, and how to edit effect parameters. Note Data created by versions earlier than PM5D V2.0 can be loaded into the PM5D V2.0 or the DSP5D. However, you must move library number 55 to number 56 or later before loading. On PM5D version 2.0 or later, library number 55 will be deleted. Recalling settings from the effect library 2 Click the / buttons at the left and right of the box in the left side of the screen to select the effect module you want to use, and then click the LIBRARY button. The EFFECT LIBRARY screen will appear, allowing you to recall or store settings in the effect library. EFFECT LIBRARY RECALL button Here's how to recall existing settings from the effect library. 1 In the DISPLAY ACCESS section, repeatedly press the [EFFECT] key to access the EFFECT PARAM screen. EFFECT PARAM LIBRARY button The effect module you are controlling Note You cannot change the currently selected effect type in the EFFECT PARAM screen. To change the effect type, you must recall (load) a library item that uses the desired effect type. Current effect type Library list Hint You can also access this screen by repeatedly pressing the [EFFECT] key. The effect module you are controlling can also be selected in this screen. 3 In the library list at the right of the screen, click to select the library item you want to recall When you click a library item in the library list, that line will be highlighted and move to the center of the list. The effect type of the currently selected library item will be shown above the library list. 4 Click the RECALL button. The selected library item will be loaded into the effect module you chose. Hint You can click the EDIT button in the upper right of the screen to access the EFFECT PARAM screen for the currently selected effect. 114 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section