Yamaha DSP5D Owner's Manual - Page 154

19 Other functions • For machine ID #1 OUT • For machine ID #2 OUT • For machine ID #3 IN OUT IN TX RX TX RX IN OUT IN TX RX TX RX Basic settings for cascade connection Here we will explain the basic settings needed when cascade-connecting the PM5D and DSP5D, and when cascade-connecting two PM5D units bi-directionally. ❏ Cascade-connecting the PM5D and DSP5D 1 In the DISPLAY ACCESS section, repeatedly press the [SYS/W.CLOCK] key until the MIXER SETUP screen appears. MIXER SETUP OUT IN OUT IN TX RX TX RX 3 While the machine ID number LEDs are lit (within five seconds), you can repeatedly press the mode switch to cycle through machine ID #1 → #2 → #3 → #1 → #2 → #3. Note The machine ID number LED indication will return to the normal display when you have not pressed the mode switch for five seconds or more. ❏ Making settings from DSP5D Editor 1 Synchronize DSP5D Editor with the DSP5D itself. 2 In the Mixer Setup window, use Cascade Connection to specify the machine ID number. Note For details, refer to the DSP5D Editor Owner's Manual. TYPE SELECT CASCADE CONNECTION area 2 In the CASCADE CONNECTION area located at the bottom of the screen, click the TYPE SELECT button to access the CASCADE TYPE SELECT window. 3 According to the DSP5D or DCU5D that is connected, select the appropriate connection type, and click the OK button to close the window. According to the type you selected, a connection diagram is shown in the CASCADE CONNECTION field, and cascade settings such as ports will be made automatically. Hint For details on each connection type, refer to p.223. 154 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section