Yamaha DSP5D Owner's Manual - Page 334

Effects Parameters ❏ COMP276 This effect emulates the characteristics of analog compressors that are widely used in recording studios. It will produce a thick, strong frame sound suitable for drums and bass. You can control two monaural channels independently. Parameter INPUT 1 OUTPUT 1 RATIO 1 ATTACK 1 RELEASE1 MAKE UP1 SIDEHPF1 INPUT 2 OUTPUT 2 RATIO 2 ATTACK 2 RELEASE2 MAKE UP2 SIDEHPF2 Range -180.0 to 0 dB -180.0 to 0 dB 2:1, 4:1, 8:1, 12:1, 20:1 0.022-50.4 ms 10.88-544.22 ms OFF, ON OFF, ON -180.0 to 0 dB -180.0 to 0 dB 2:1, 4:1, 8:1, 12:1, 20:1 0.022-50.40 ms 10.88-544.22 ms OFF, ON OFF, ON Description Adjusts the CH1 input level Adjusts the CH1 output gain Ratio for CH1 compressor Attack time for CH1 compressor Release time for CH1 compressor Automatically corrects output gain reduction when CH1 compressor is applied When the HPF in the side chain of the CH1 compressor is turned on, the compression applied to the low range will be weakened, thus emphasizing the low range. Adjusts the CH2 input level Adjusts the CH2 output gain Ratio of CH2 compressor Attack time of CH2 compressor Release time of CH2 compressor Automatically corrects output gain reduction when the CH2 compressor is applied When the HPF in the side chain of the CH2 compressor is turned on, the compression applied to the low range will be weakened, thus emphasizing the low range. ❏ COMP276S This effect emulates the characteristics of analog compressors that are widely used in recording studios. It produces a thick, strong frame sound suitable for drums and bass. You can link and control the L and R channel parameters. Parameter INPUT OUTPUT RATIO ATTACK RELEASE MAKE UP SIDE HPF Range -180.0 to 0 dB -180.0 to 0 dB 1:2, 4:1, 8:1, 12:1, 20:1 0.022-50.40 ms 10.88-544.22 ms OFF, ON OFF, ON Description Adjusts the input level Adjusts the output gain Ratio of the compressor Attack time of the compressor Release time of the compressor Automatically corrects output gain reduction when the compressor is applied When the HPF in the side chain of the compressor is turned on, the compression applied to the low range will be weakened, thus emphasizing the low range. ❏ COMP260 This effect emulates the characteristics of mid 70's compressors/limiters that are the standard for live SR. You can control two monaural channels independently. You can also link several parameters via stereo links. Parameter Range THRE.1 -60.0 to 0.0 dB KNEE1 SOFT, MEDIUM, HARD ATTACK1 0.010-80.0 ms RELEASE1 6.2-999.0 ms RATIO1 1.00-500, ∞ OUTPUT1 -20.0 to 40.0 dB THRE.2 -60.0 to 0.0 dB KNEE2 SOFT, MEDIUM, HARD ATTACK2 0.010-80.0 ms RELEASE2 6.2-999.0 ms RATIO2 1.00-500, ∞ OUTPUT2 -20.0 to 40.0 dB ST LINK OFF, ON Description Threshold of CH1 compressor Knee of CH1 compressor Attack time of CH1 compressor Release time of CH1 compressor Ratio of CH1 compressor Adjusts the CH1 output gain Threshold of CH2 compressor Knee of CH2 compressor Attack time of CH2 compressor Release time of CH2 compressor Ratio of CH2 compressor Adjusts the CH2 output gain Links CH1 and CH2 as a stereo pair. THRE., KNEE, ATTACK, RELEASE, and RATIO parameters are linked; OUTPUT parameter is not linked ❏ COMP260S This effect emulates the characteristics of mid 70's compressors/limiters that are the standard for live SR. You can link and control the L and R channel parameters. Parameter THRE. KNEE ATTACK RELEASE RATIO OUTPUT Range -60.0 to 0.0 dB SOFT, MEDIUM, HARD 0.010-80.0 ms 6.2-999.0 ms 1.00-500, ∞ -20.0 to 40.0 dB Description Threshold of the compressor Knee of the compressor Attack time of the compressor Release time of the compressor Ratio of the compressor Adjusts the output gain 334 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Reference section