Yamaha DSP5D Owner's Manual - Page 20
Front panel, MIDI IN/THRU/OUT connectors
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2 Top, front, and rear panels Q GPI connector This is a D-sub 25-pin female connector that allows communication with a GPI-equipped external device. R RS422 REMOTE connector This is a D-sub 9-pin female connector for remotely controlling an external device that supports the RS422 protocol. S HA REMOTE connector This is a D-sub 9-pin male connector for remotely controlling an external head amp device (e.g., Yamaha AD8HR or AD824) that supports a special protocol. T WORD CLOCK IN connector This is a BNC connector for supplying a word clock from an external device to the PM5D. U 75Ω ON/OFF switch This switch terminates the word clock connection. Normally you will leave this ON. If a device made by another manufacturer is connected and word clock cannot be received correctly, try turning this OFF. V WORD CLOCK OUT connector This is a BNC connector for supplying a word clock from the PM5D to an external device. W MIDI IN/THRU/OUT connectors These connectors are used to transmit and receive MIDI messages to and from external MIDI devices. The MIDI IN connector receives messages from an external device, and the MIDI OUT connector transmits messages from the PM5D. Messages received at the MIDI IN connector are retransmitted without change from the MIDI THRU connector. X 2TR OUT DIGITAL (2 track out digital) jacks 1-3 These jacks digitally output the signals of the STEREO A/B channels. Two types are provided; AES/EBU (XLR-3-32) jacks (1/2) which output AES/EBU format signals, and a COAXIAL (RCA phono) jack (3) which outputs consumer format signals (IEC60958). Y 2TR IN DIGITAL (2 track in digital) jacks 1-3 These jacks input digital audio from external devices such as CD players. Two types are provided; AES/EBU (XLR-3-31) jacks (1/2) which receive AES/EBU format Front panel MEMORY CARD 1 6 5 4 3 21 MOUSE 6 5 4 3 21 KEYBOARD 23 PHONES 4 MEMORY CARD MOUSE KEYBOARD PHONES signals, and a COAXIAL (RCA phono) jack (3) which receives consumer format signals (IEC60958). Z CASCADE OUT connector This is a D-sub half-pitch 68-pin female connector that can be connected to another PM5D, DSP5D, DCU5D or DME64N for transmission/reception of control signals and transmission of audio signals. a CASCADE IN connector This is a D-sub half-pitch 68-pin female connector that can be connected to another PM5D, DSP5D or DCU5D for transmission/reception of control signals and reception of audio signals. b c b Cooling fan vent This is the vent for the cooling fans inside the console (two locations). When placing the unit, take care that this vent is not obstructed. c SLOT 1-4 These slots allow separately sold mini-YGDAI I/O cards to be installed to expand the input/output ports. A MEMORY CARD slot A memory card inserted in this slot can be used to save/load scene memories or library data. You can use PCMCIA Type II flash ATA cards, or CompactFlash cards inserted into a PC card adaptor. B MOUSE connector A PS/2 mouse can be connected to this connector and used to perform operations in the display. C KEYBOARD connector A PS/2 keyboard can be connected to this connector and used to input text or perform operations in the display. D PHONES (Headphone) jack This headphone jack lets you monitor the MONITOR OUT or CUE signals. 20 PM5D/PM5D-RH V2 / DSP5D Owner's Manual Operating section
![](/manual_guide/products/yamaha-dsp5d-owners-manual-81b84d8/20.png)